Labcells
is a iso9001:2000 manufacturer and supplier of cells,
cuvettes and accessories for spectrophotometers, fluorometers and colorimeters.It is possible, Trying to cut costs without sacrificing quality or
service,if you choice Labcells® cuvettes.
Firstly,
we should know the importance of cleaning the cuvettes.
Cleaning
cells is the foundation of any spectrophotometric or fluorometric analysis.
The residue from previous analysis will cause inaccuracies, low sensitivity
and lack of precision. More important, it will waste your time! Also inspect
the condition of the cells. If they are cracked, chipped or scratched it is
important to replace the cells with new ones as your time is more valuable
than the cost of new cells.
The table below will give you some suggestions for cleaning:
Solvent
Material
Suggested Cleaning
Methods
Aqueous
Protein,DNA,
Biologics
Warm water with
detergent, Mild acid rinse, Copious water rinse
Aqueous
Salt solutions
Strong
acid rinse, copious water rinse
Aqueous
Basic
solutions
Warm
water with detergent, Mild acid rinse, Copious water rinse
Organic
Oil based
Rinse with solvent,
Warm water with detergent, Mild acid rinse, Copious water rinse
Organic
Alcohol
solutions
Rinse
with solvent, Copious water rinse
Organic
Acidic
solutions
Rinse
with solvent, Copious water rinse
Organic
Basic
solutions
Rinse
with solvent, Mild acid rinse, Copious water rinse
Definitions:
Mild Acid
Equalivent to
0.1mol/l HCl
Strong
Acid
Equalivent to 1
mol/l HCl
Solvent
rinse
Rinse
with the solvent that solvated your sample in the first place!
Copious
water rinse
Use a pure water
like deionized, distilled or RO and rinse at least 10 times
Detergent
Use a
neutral pH detergent if available but acid wash and water rinse to remove
detergent residues
Ultrasonic
Cleaners
We do not recommend
the use of ultrasonic cleaning baths with cells. Each bath generates a
different frequency and if your bath operates at the resonant frequency of a
cell, the cell will break. We do not warranty our cells for cleaning in an
ultrasonic cleaner.
Mild Acid
Equalivent to
0.1mol/l HCl
Strong
Acid
Equalivent to 1
mol/l HCl
Solvent
rinse
Rinse with the
solvent that solvated your sample in the first place!
Copious
water rinse
Use a pure water
like deionized, distilled or RO and rinse at least 10 times
Detergent
Use a
neutral pH detergent if available but acid wash and water rinse to remove
detergent residues
Ultrasonic
Cleaners
We do not recommend
the use of ultrasonic cleaning baths with cells. Each bath generates a
different frequency and if your bath operates at the resonant frequency of a
cell, the cell will break. We do not warranty our cells for cleaning in an
ultrasonic cleaner.
This site contains information on the product information for reference purposes
only . The information on this website is not legally binding. Reserves the
right to change the technical parameters and effectiveness of the rights and any
other information .